Rolex Cosmograph Daytona 116500LN high quatily replica watch has always used stainless steel and black dial. Added a black “Cerachrom” bezel. This new type of improved fixed baffle has a high degree of scratch resistance, excellent corrosion resistance and the ability to not penetrate ultraviolet fading effect. Compared with the previous polished stainless steel bezel, the current black bezel gives the impression that it is a larger dial.
The luxury replica watch case uses an oyster shell, which is made of Rolex’s corrosion-resistant high-temperature alloy 904L steel, which has more polishing properties than ordinary stainless steel. Using this “Triplock” locking system, Daytona’s case can be as waterproof as a submarine hatch, with a minimum waterproof rating of 100m / 300ft.
The most famous chronograph of Cosmograph Daytona AAA replica watch. Everything remains the same from polished steel hour markers with bright fillings to proportions. The easy-to-read Chromalight display uses a long-lasting luminescent material that glows in a bright blue hue in the dark. Like any luxury Rolex replica watch’s Daytona chronograph, the word DAYTONA is printed in red and wrapped around the top of the small seconds at 6 o’clock.
Aesthetically, the silver-rimmed sub-register on the cheap replica watch dial remains unchanged from the previous model. The bottom central sub-dial at 6 o’clock is the smaller running seconds sub-dial. The chronograph uses the sub-registers at 3 and 9 o’clock to the left and right of this sub-dial.
The large central seconds hand of the chronograph sweeps the dial very smoothly through the permanent movement known for Rolex replica watch. The small dial on the right side of the dial at 3 o’clock is a 30-minute counter, and at 9 o’clock, opposite the dial is a 12-hour counter. These three hands are operated smoothly via the chronograph buttons, which are located above and below the winding crown on the right side of the case.
The best replica watch uses an Oyster bracelet made of three-piece oystersteel steel chain.The two outer links have a brushed surface, while the middle link has a polished finish. The links at both ends of the bracelet are connected to the polished lugs on the case, and the finishes alternate from polished to brushed, and then to the polished finish of the middle link.
